Original FCC: LabDron runs as DJI Fly with FCC built in. No extra app, no command sent every 2 seconds. See the difference
LabDron

DJI FCC RC Pro / RC Pro 2 (+120 m Removal) — Installation Guide

Related product: DJI FCC RC Pro / RC Pro 2 (+120 m Limit Removal)

Installation: Copy the downloaded .APK file to the controller and install it. For stable operation, uninstall the original DJI Fly. If you get stuck, contact our WhatsApp support line at +90 850 308 46 50.

What you need

  • DJI RC Pro or DJI RC Pro 2 controller
  • MicroSD card or USB-C cable (to copy the file to the controller)
  • Internet (Wi-Fi) on the controller for the first sign-in

Package contents

Once your activation is complete, download LabDron-DJI-FCC-RCPro.apk (about 700 MB) with the Download button on My Account → My Activations. It is a single file; the same app works on both the RC Pro and the RC Pro 2.

Step 1 — Copy the APK file to the controller

  1. Copy the downloaded APK file to a MicroSD card and insert the card into the controller, or connect the controller to your computer with a USB-C cable and copy the file to the controller's storage.

Step 2 — Install

  1. Open the controller's file manager, find the APK file and tap it.
  2. If an "Allow unknown sources" prompt appears, allow it and tap Install. The file is large, so installation may take 1–2 minutes.

Step 3 — Uninstall the original DJI Fly

  1. For stable operation, uninstall the original DJI Fly app on the controller (Settings → Apps → DJI Fly → Uninstall). You will fly with the LabDron app from now on.

Step 4 — Sign in

  1. Connect the controller to Wi-Fi and open the LabDron app.
  2. On the sign-in screen, enter the username and password you chose at checkout. They are shown on the My Activations page.
  3. Once the sign-in is confirmed, close the app and open it again. The license is bound to this controller; the app then works offline, but to keep the license active, connect the controller to the internet and open the app at least once every 30 days (otherwise FCC turns off and you need to sign in again).

Check

  • Connect the drone and turn on the FCC and 120 m limit options in the app's control panel.
  • If you see a "device change" warning on the sign-in screen, the license is bound to another controller; ask support for a device reset.